cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1050
Views
0
Helpful
2
Replies

1841 SEC K9 with HWIC-2FE

bashan121
Level 1
Level 1

Hi!

Is it possible to use the HWIC-2FE module into the 1841 SEC/K9 bundle? Using the online Cisco Dynamic config tool, HWIC-2FE is not listed as an option when you select the 1841. Does it mean that this configuration won't work? Thanks very much for your help!

1 Accepted Solution

Accepted Solutions

Jon Marshall
Hall of Fame
Hall of Fame

Unfortunately the 1841 does not support the HWIC-2FE module. It only supports the HWIC-1FE module. See attached link for more details -

http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/fe_hwic.html#wp1049748

Jon

View solution in original post

2 Replies 2

Jon Marshall
Hall of Fame
Hall of Fame

Unfortunately the 1841 does not support the HWIC-2FE module. It only supports the HWIC-1FE module. See attached link for more details -

http://www.cisco.com/en/US/docs/routers/access/interfaces/ic/hardware/installation/guide/fe_hwic.html#wp1049748

Jon

Hi Jon!

Thanks very much for the useful link, you answered my inquiry authoritatively. On the side though, I have another question regarding the HWIC-1FE. Using the config tool, after choosing the 1841 SEC K9, it won't allow me to choose the HWIC-1FE unless I change the IOS to one that doesn't have crypto, why is that? Who would want to use an IOS without crypto? Thanks very much again for your help.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco