Client VPN cannot see the remote pcs

Unanswered Question
Sep 3rd, 2008


I have a problem with the VPN connection.I am connecting asa5520 and client vpn software. VPN connection is up. Problem is that i can only ping one remote pc. I was just using the wizard to set up the connection.attached is the running config. Help is very much appreciated.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
bamnocadmin Wed, 09/03/2008 - 06:47


Can you be more specific on that IP you are trying to ping from what subnet?

I see you are assigning IPs to VPN Clients from, but you have /28 network in split tunnel ACL.


acomiskey Wed, 09/03/2008 - 07:05

You can also get rid of this...

no access-list test_splitTunnelAcl_1 standard permit

cempuerto Wed, 09/03/2008 - 14:20

i try this once i get to the office.thanks alot for sharing your time on this concern

cempuerto Thu, 09/04/2008 - 14:43

i have removed this line "access-list test_splitTunnelAcl_1 standard permit". still no changes..any other suggestion??

cempuerto Wed, 09/03/2008 - 14:16

i am trying to ping network. i was able to ping but the rest of the pc and gateway.i could the way i have set up a site to site and remote server vpn using the same asa5520.i dont have problems pinging from the otherside.if i am fro 1.0 netwrk i can ping the pc from network 3.0

singhsaju Fri, 09/05/2008 - 09:23

Are you able to ping ASA's inside interface?

It looks to me a routing issue rather than configuration issue. Check routing for remote subnet in the network .

Can you post result of "show crypto ipsec sa" ?




This Discussion