09-03-2008 08:26 AM - edited 03-14-2019 02:49 AM
When I do a transfer from CVP over the PSTN throught the SIP Proxies. it uses the ringer.wav TCL on the gateway. It sounds terrible like choppy and awful except for like 1 every 4 rings. I treid putting it on the VXML gateways and the ingress gateways but they both sounds awful..
Any ideas?
Chad
Solved! Go to Solution.
09-04-2008 01:01 PM
On your egress gateway pots dial peer you can add this CLI:
progress_ind alert strip
09-03-2008 09:45 AM
Sounds fine here.
I even copied it off the CVP distribution (ringback.wav) and use it in CVP when I route to a "preferred agent" for a brief time - approx 4 seconds. It sounds great.
Regards,
Geoff
09-03-2008 10:37 AM
Geoff,
I found the problem but don't know the fix. on transfers to the PSTN its playing the CVP ringer and the one from the Telco. How to I prevent CVP from playing ringer.wav on a particular label transfer or say all calls that go to 12>
Thanks,
Chad
09-04-2008 01:01 PM
On your egress gateway pots dial peer you can add this CLI:
progress_ind alert strip
09-04-2008 03:17 PM
12.4(15)T and I don't have this command available? Is it not available until a certain IOS?
Thanks much!
Chad
09-05-2008 07:37 AM
Ahh I see, its a hidden command. works perfectly, thanks much!
Chad
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: