cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
506
Views
0
Helpful
5
Replies

CVP SIP Ringer sounds terrible

Chad Stachowicz
Level 6
Level 6

When I do a transfer from CVP over the PSTN throught the SIP Proxies. it uses the ringer.wav TCL on the gateway. It sounds terrible like choppy and awful except for like 1 every 4 rings. I treid putting it on the VXML gateways and the ingress gateways but they both sounds awful..

Any ideas?

Chad

1 Accepted Solution

Accepted Solutions

On your egress gateway pots dial peer you can add this CLI:

progress_ind alert strip

View solution in original post

5 Replies 5

geoff
Level 10
Level 10

Sounds fine here.

I even copied it off the CVP distribution (ringback.wav) and use it in CVP when I route to a "preferred agent" for a brief time - approx 4 seconds. It sounds great.

Regards,

Geoff

Geoff,

I found the problem but don't know the fix. on transfers to the PSTN its playing the CVP ringer and the one from the Telco. How to I prevent CVP from playing ringer.wav on a particular label transfer or say all calls that go to 12>

Thanks,

Chad

On your egress gateway pots dial peer you can add this CLI:

progress_ind alert strip

12.4(15)T and I don't have this command available? Is it not available until a certain IOS?

Thanks much!

Chad

Ahh I see, its a hidden command. works perfectly, thanks much!

Chad