cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1313
Views
0
Helpful
2
Replies

%ISSU-SP-3-INCOMPATIBLE_PEER_UID - 7600 series

sultan-shaikh
Level 3
Level 3

Hi All,

I am getting this message "%ISSU-SP-3-INCOMPATIBLE_PEER_UID" and it also says that image in peer is incompatible, couldn't find any reference to this anywhere.

This causes the standby SUP720-3B to go to 'COLD' standby mode.

I have configured sso, but it reverts to rpr after standby reload.

Any suggestions?

Thanks

Cheers

~sultan

2 Replies 2

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Sultan,

ISSU is in service software upgrade and is based on SSO

Cisco IOS Releases 12.2SRB1 and later support ISSU on Cisco 7600 series routers. During an ISSU upgrade, the router continues to route and forward traffic, which allows you to upgrade from one software release to another with minimal system downtime (between 0 and 3 seconds).

see

http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/efsuovrw.html#wp1095736

Do you have two SUP720-3B on the chassis with the same IOS code ?

The message looks like that the active Sup doesn't like the standby one.

If so I would consider an upgrade to 12.2SRB1 or later.

Hope to help

Giuseppe

Hi Giuseppe,

Appreciate your quick response.

I have 2 SUP, and the IOS is 12.2 (33) SRB2.

Still having that problem.

Would appreciate any inputs.

Thanks

Cheers

~sultan

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: