CALLMANAGER-QSIG-GF-ALCATEL-4400

Unanswered Question
Sep 4th, 2008
User Badges:

Hi all,


I'm having the folowing senario,


PSTN-->CISCO-GW-2821---->CALLMA-(QSIG-GF)----->ALCATEL-4400.


When same one from the pstn call to a DN on alcatel 4400 the alcatel 4400 responds to a setup from the callmanager with a CALL-PROC folowed by a ALERTING with PI=8 and folowed by a PROGRESS with a PI=8. With the alerting with PI=8 the pstn does not open the audio channel. The alcatel 4400 as a feature (connect on progress) that generate a connect message in the presence of a progress message. On the cisco does any one knows a equivalent feature on the cisco side to send the connect message to the pstn based on the receiving progress from the alcatel.


Many thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
przemzambrzy Thu, 03/12/2009 - 05:03
User Badges:

Hi all,


I have similar problem. Does anyone find a solution?


Thanks in advance

aherraez77 Tue, 03/24/2009 - 06:14
User Badges:

Hello:


Have you tried to use this comand in the GW cisco?


In the pots outbound dial peer:

progress_ind progress enable 8


Hope this helps, please rate post if it does!


patcbr600 Tue, 03/24/2009 - 08:00
User Badges:


Hi all,


The only way to resolve the issue was using


a a feature "connect on progress" on alcatel side.



Actions

This Discussion