09-04-2008 07:48 AM - edited 03-17-2019 09:29 PM
Hi all,
I'm having the folowing senario,
PSTN-->CISCO-GW-2821---->CALLMA-(QSIG-GF)----->ALCATEL-4400.
When same one from the pstn call to a DN on alcatel 4400 the alcatel 4400 responds to a setup from the callmanager with a CALL-PROC folowed by a ALERTING with PI=8 and folowed by a PROGRESS with a PI=8. With the alerting with PI=8 the pstn does not open the audio channel. The alcatel 4400 as a feature (connect on progress) that generate a connect message in the presence of a progress message. On the cisco does any one knows a equivalent feature on the cisco side to send the connect message to the pstn based on the receiving progress from the alcatel.
Many thanks
03-12-2009 05:03 AM
Hi all,
I have similar problem. Does anyone find a solution?
Thanks in advance
03-24-2009 06:14 AM
Hello:
Have you tried to use this comand in the GW cisco?
In the pots outbound dial peer:
progress_ind progress enable 8
Hope this helps, please rate post if it does!
03-24-2009 08:00 AM
Hi all,
The only way to resolve the issue was using
a a feature "connect on progress" on alcatel side.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: