We insert a line card of 24-port SFP into 6509E switch. It came up with the following error:
PM_SCP-SP-2-LCP_FW_ERR_INFORM: Module 7 is experiencing the following error: Bus Asic #0 transient Pb error. Recovered. (0x0020, 0x0000)
All VLANs and OSPFs are restarted. Now it is running without problem.
Do you know what does the error mean?
System messages begin with a percent sign (%) and are structured as follows. The text in bold are required elements of the System Message, the text in italics are optional elements of the System Message.
SUBFACILITY is used only for Cisco Catalyst 6500 series switches that are operating in a distributed system. The subfacility can consist of one code, or two codes that are divided by a hyphen, and describes the part of the distributed system from where the message is coming. For example, the%DIAG-SP-STDBY-6-RUN_MINIMUM system message is the %DIAG-6-RUN_MINIMUM message coming from the switch processor (SP) that is in redundant or standby (STDBY) mode.
So the SP is the standby processor, if you have two processors, the message is the same but it has been reported by the standby processor.
Hope to help