Need help in configuring NAT on this Friday Afternoon...

Answered Question
Sep 5th, 2008
User Badges:

ok, my brain is no longuer functioning right...


Need to nat an external IP to an internal IP (or port forward of somekind).


Example:

External IP on E1/1 68.10.10.10 port 25

to

Internal IP on F0/1 10.10.10.15 port 25


How could I do this?

This is on a 3600 router, I know it's not a firewall but can this still be done? if so, How?

Correct Answer by jonesm111 about 8 years 8 months ago

You must also enable NAT to happen on the interfaces that it passes through as well.


like; ip nat inside (allow inbound NAT)


Here is an example..


http://www.cisco.com/en/US/docs/ios/ipaddr/command/reference/iad_nat.html


Please rate if it helps...


--Mike



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Collin Clark Fri, 09/05/2008 - 10:28
User Badges:
  • Purple, 4500 points or more

ip nat inside source static tcp 192.168.0.1 80 interface serial0 80


Hope that helps.

pipsadmin Fri, 09/05/2008 - 10:36
User Badges:

so this would work for inbound traffic comming from the outside being routed to the internal device?

Collin Clark Fri, 09/05/2008 - 10:49
User Badges:
  • Purple, 4500 points or more

Yes assuming that other NAT configuration is in place.

Actions

This Discussion