×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.
Rob Huffman Fri, 09/05/2008 - 16:33
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Ladislao,


Sadly this won't work.


I have searched hi and low and have spoken with some experts about the Utility Interface and all they can tell me is that it is reserved for "Future" use and serves absolutely no function at this time.


Here is the relevant clip;


"Note: Figure 3-2 shows a Cisco 4404 controller. The Cisco 4402 controller is similar but has only two distribution system ports. The utility port, which is the unlabeled port in Figure 3-2, is currently not operational."


Cisco Wireless LAN Controller Configuration Guide, Release 5.0


Configuring Ports and Interfaces


http://www.cisco.com/en/US/docs/wireless/controller/5.0/configuration/guide/c5mint.html#wp1113882


Hope this helps!

Rob

ladislao2006 Mon, 09/08/2008 - 10:08
User Badges:

Thank You Rob!!! I gonna have to use the SFP port with Gbics...! Bye

Actions

This Discussion