09-05-2008 10:55 AM - edited 03-15-2019 01:04 PM
Would you provide me some information about the Utility Port function in a WLC4402.
Can use this port as AcessPoints Connection??
09-05-2008 04:33 PM
Hi Ladislao,
Sadly this won't work.
I have searched hi and low and have spoken with some experts about the Utility Interface and all they can tell me is that it is reserved for "Future" use and serves absolutely no function at this time.
Here is the relevant clip;
"Note: Figure 3-2 shows a Cisco 4404 controller. The Cisco 4402 controller is similar but has only two distribution system ports. The utility port, which is the unlabeled port in Figure 3-2, is currently not operational."
Cisco Wireless LAN Controller Configuration Guide, Release 5.0
Configuring Ports and Interfaces
http://www.cisco.com/en/US/docs/wireless/controller/5.0/configuration/guide/c5mint.html#wp1113882
Hope this helps!
Rob
09-08-2008 10:08 AM
Thank You Rob!!! I gonna have to use the SFP port with Gbics...! Bye
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: