ASA5520 and DHCP Server

Unanswered Question
Sep 5th, 2008
User Badges:

I setup an interface on my ASA5520 to be a guest network so visitors of our company would have access to the internet. However, I'm not able to get DHCP working properly. If I hardcode the settings, everything works fine. Can someone look at this config and let me know if I'm missing something? Thanks.


interface GigabitEthernet0/2

nameif guest

security-level 50

ip address 10.1.1.254 255.255.255.0


dns domain-lookup guest


dns server-group DefaultDNS

name-server 68.6.16.25

name-server 68.6.16.30


nat (guest) 10 0.0.0.0 0.0.0.0

dhcpd address 10.1.1.1-10.1.1.10 guest

dhcpd dns 68.6.16.25 68.6.16.30 interface guest

dhcpd update dns both override interface guest

dhcpd enable guest

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
JORGE RODRIGUEZ Fri, 09/05/2008 - 13:01
User Badges:
  • Green, 3000 points or more

The config for basic dhcp is fine, I have seen scenarios where dhcpd get stuck by disabling and re-enabling it activates ..


try


no dhcpd enable gues, then re-enable it


dhcpd enable guest


if not then


debug dhcpd event

debug dhcpd packet



Rgds

Jorge


corey.mckinney Fri, 09/05/2008 - 13:11
User Badges:

Thanks!! Disabling and Enabling fixed the issue.


I hate when that's the problem.

Actions

This Discussion