snmpv3 write

Answered Question
Sep 5th, 2008
User Badges:
  • Bronze, 100 points or more

Hi,

When i'm trying to config snmpv3 to a devices, i didn't see write or read privileges like snmpv2c?


Does snmpv3 read only privilege?


Thanks in advance


Abd Alqader

Correct Answer by Joe Clarke about 8 years 8 months ago

You can assign a write view to an SNMPv3 group. For example:


snmp-server group v3group v3 auth write v1default


This will allow any user in this group to write all typical read-write or read-create objects.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Joe Clarke Fri, 09/05/2008 - 14:15
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

You can assign a write view to an SNMPv3 group. For example:


snmp-server group v3group v3 auth write v1default


This will allow any user in this group to write all typical read-write or read-create objects.

a.hajhamad Fri, 09/05/2008 - 14:18
User Badges:
  • Bronze, 100 points or more

Thanks.

I got it.

I need to add write to the default view (v1default).

I tried before another new view name and i didn't get write privileges.


Thanks again

Joe Clarke Fri, 09/05/2008 - 14:21
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

You can create your own view if you want to limit write access to only certain objects. However, you must define that view name before it will work.

Actions

This Discussion