Different VLANs for certificate none-certificate devices.

lennarth_selander · ‎09-06-2008

I'm working on a home user solution for our employes.

This is how I want it to work.

If a user plug in a device that has a valid company certificate then the device should be to the company VLAN and has access to company network via a NEM connection.

If there's no valid certificate on the device the it should be assigned to thenon-company VLAN and all traffic should be directly to outside / internet.

I have the NEM part workig but havn't found any info about the certificate / VLAN part.

I would be nice if everything could be handled by the ASA box.

Anyone who has seen some documentation for this?

Thanks

Lennarth

Marwan ALshawi · ‎09-06-2008

hi there

this Doc addres a case similer to urs same idea but with cisco IOS firewall not ASA but the idea the same

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6660/ps6808/deployment_guide_c07_458259_ps6660_Products_White_Paper.html

if helpful Rate