09-06-2008 09:12 AM - edited 03-15-2019 01:05 PM
Hi,
I configured my CME to have paging feature.But i couldnt make it function. All the speaker phone lights are showing when i dial the paging number, But there is no voice coming out...
I didnt it in the same way as mentioned in the below link
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepage.html
Please let me know is there any thing which i need to add along with this
09-06-2008 01:22 PM
You need to ensure multicast traffic is enabled and working on your network.
Chris
11-07-2008 10:01 PM
Hi, Did you manage to find the cause of the problem ? I'm also looking at the same problem, phone lights up but no voice. Phones are on the same VLAN so i don't think it's a multicast issue.
Regards.
11-08-2008 06:11 AM
Even if it's on the same VLAN you need to make sure multicast is enabled on your network.
Chris
11-08-2008 04:25 PM
Hi, Just to eliminate the switch from the list of problem areas, I have tested the multicast functions of the switch. I put 2 PCs on the voice VLAN and installed a multicast testing software on them. They talk ok.
Regards.
11-10-2008 06:08 AM
I have fixed it. Turns out to be a multicast problem as the CME is on another VLAN and i didn't expect the paging traffic to originate from the CME IP address. (I was expecting the traffic to be from 1 phone to the other phone, thus on the same VLAN)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide