Flash "key not available here"

Answered Question
Sep 6th, 2008

I've got a CCME where the phones display the Flash softkey, but when pressing it, it displays key not available. How do I make it available?

I have this problem too.
0 votes
Correct Answer by mattcalderon about 8 years 2 months ago

this is used if you have call waiting available on a POTS line. Under telephony-service utilize the command "fxo hook-flash"

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_f1ht.html#wp1023105

Note that once a flash soft key has been enabled on an IP phone, it is available to provide hookflash functionality during all calls except local IP-phone-to-IP-phone calls

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
mattcalderon Sun, 09/07/2008 - 05:56

this is used if you have call waiting available on a POTS line. Under telephony-service utilize the command "fxo hook-flash"

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_f1ht.html#wp1023105

Note that once a flash soft key has been enabled on an IP phone, it is available to provide hookflash functionality during all calls except local IP-phone-to-IP-phone calls

Actions

This Discussion