hi,
i'm using a C2960 in one of our LAN office. is confreg 0xF ok? i know 0x2102 is the good confreg setup. will this affect the switch boot sequence or if ever restarts and stuck in Rommon?
vimix4#sh ver
Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)SEE2, RELE
ASE SOFTWARE (fc1)
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Fri 28-Jul-06 04:33 by yenanh
Image text-base: 0x00003000, data-base: 0x00AA2F34
ROM: Bootstrap program is C2960 boot loader
BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)SEE1, RELEASE SOFTWA
RE (fc1)
vimix4 uptime is 2 weeks, 4 days, 16 hours, 46 minutes
System returned to ROM by power-on
System restarted at 21:10:12 PDT Tue Aug 19 2008
System image file is "flash:c2960-lanbase-mz.122-25.SEE2/c2960-lanbase-mz.122-25
.SEE2.bin"
cisco WS-C2960-48TC-L (PowerPC405) processor (revision B0) with 61440K/4088K byt
es of memory.
Processor board ID FOC1050ZB7P
Last reset from power-on
1 Virtual Ethernet interface
48 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:1A:A1:56:5F:80
Motherboard assembly number : 73-9835-07
Power supply part number : 341-0097-02
Motherboard serial number : FOC10500UFM
Power supply serial number : DCA1045816B
Model revision number : B0
Motherboard revision number : C0
Model number : WS-C2960-48TC-L
System serial number : FOC1050ZB7P
Top Assembly Part Number : 800-26672-02
Top Assembly Revision Number : C0
Version ID : V02
CLEI Code Number : COM3F00BRA
Hardware Board Revision Number : 0x02
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 50 WS-C2960-48TC-L 12.2(25)SEE2 C2960-LANBASE-M
Configuration register is 0xF
