IPCC Entreprise : CAD Failure

Unanswered Question
Sep 8th, 2008
User Badges:

Hi all,

Please we need an extreemly urgent help about this issue.

We are working with IPCCE and CAD 7.2.

Currently, On some agent's PCs CAD cannot login !! and we have the following error :

"The Request Failed because a timeout limit was exceeded"

-There is no firewall filtering!!

-Cisco IP communicator was opened.

-The porblem occured on PCs that were already working normally!!

-The cisco IP communicaor is assigned to the JTAPI user.

Please note that the problem dissappaear for sometimes and come back again when we do the following :In CallManager We Change The IP communicator Extension and bring it back. Or when we disassociate and reassociate the Device (IP communicator) with the JTAPI user!!!!

Here joined the Log of the Client desktop and screenshots of the error messages.

here attached too the message that occurs In the CTI OS server side, we see the following messeage :

Date & Time ClientMgr[1]::OnConnectionClosed, Client [AGENT'S PC NAME]

Please see attached scrrenshot!!

Please we need help urgently, the problem is occuring more frequently on agent's PCs.

Thanks in advance.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Zin.Karzazi Mon, 09/08/2008 - 04:07
User Badges:
  • Silver, 250 points or more

We had this error once, it was related to Extension mobility and people not logging out properly from their Cisco Phone (they unplug the cable instead of logging out using EM).

The other thing that helped was recycling the PG.


Zinelabidine Karzazi

haouaswajih Mon, 09/08/2008 - 04:16
User Badges:

Hi ,thx for you respond.

Please note that we are using Cisco Ip communicator. And we did reload the PGs, but the problem still persit.

Any advice please???!! help

haouaswajih Mon, 09/08/2008 - 04:49
User Badges:

Thanks for your help Zin,

I'll post there and i hope i'll get the answear



This Discussion