LWAPP cannot translate cisco-lwapp-controller

Unanswered Question
Sep 8th, 2008
User Badges:

Hi all:

I had add a hostname to DNS server as CISCO-LWAPP-CONTROLLER . and i use my controller as a internal DHCP server , it will assign ip to a lot of vlan. My lightweigh ap cannot translate the cisco-lwapp-controller and other a record at DNS server .

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Scott Fella Mon, 09/08/2008 - 17:10
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Can you translate that on the local lan? Verify that the manamgement and ap-manager is configured for vlan "0" untagged and that the trunk port is setup with the native vlan of the WLC management and ap-manager interface. If you console in the ap and power cycle the ap, what does the log show. Post the log so we can take a look at it.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode