cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
455
Views
0
Helpful
1
Replies

LWAPP cannot translate cisco-lwapp-controller

samuelwai
Level 1
Level 1

Hi all:

I had add a hostname to DNS server as CISCO-LWAPP-CONTROLLER . and i use my controller as a internal DHCP server , it will assign ip to a lot of vlan. My lightweigh ap cannot translate the cisco-lwapp-controller and other a record at DNS server .

1 Reply 1

Scott Fella
Hall of Fame
Hall of Fame

Can you translate that on the local lan? Verify that the manamgement and ap-manager is configured for vlan "0" untagged and that the trunk port is setup with the native vlan of the WLC management and ap-manager interface. If you console in the ap and power cycle the ap, what does the log show. Post the log so we can take a look at it.

-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: