09-08-2008 07:11 AM
Hi
I've a GRE tunnel configured between a CE and a PE.
I guess the problem is on the PE side, this is my config:
interface Loopback99
ip vrf forwarding dar
ip address 99.99.99.99 255.255.255.255
interface Tunnel199
ip vrf forwarding dar
ip address 11.11.11.1 255.255.255.252
ip policy route-map dfbit
tunnel source Loopback99
tunnel destination 88.88.88.88
tunnel path-mtu-discovery
Everything is reachable between PE and CE, but on the tunnel interface I wasn't able to find out the "tunnel vrf dar" command...
I've a Cisco 7206VXR (164 ram and 128 flash) and on the software feature navigator I wasn't able to find out an IOS support it..
Can anybody tell me why ?
Tks
Ric
Solved! Go to Solution.
09-08-2008 02:29 PM
Riccardo,
This feature is available starting with 12.3(2)T.
Regards
09-08-2008 02:29 PM
Riccardo,
This feature is available starting with 12.3(2)T.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide