09-08-2008 07:50 PM - edited 07-03-2021 04:26 PM
I have 1310 Ap/Bridge with integraded antinna.
if we use it as outdoor point to pint bridge configuration. then what will be max distance at 54.
09-11-2008 07:54 AM
Hi ansar
we are not able to define exact distance at 54 Mbps bandwidth.because its depends on line of sight and variety of natural conditions.take the following senario
1310 with AIR_ANT 1949 ( External Antenna ) it will supports upto 4 Kms 35 to 40 Mbps of bandwidth.
regs
S.Mohana sundaram
09-11-2008 08:22 AM
In an environment without obstacles in the signal path, the maximum distance between
bridges depends primarily on the type of antennas and the free space loss between them.
Make sure your proposed mounting site is within range of the remote antenna. The bridge supports 54-Mbps data rates at distances of up to 0.6 mi (1 km) and 6 Mbps at distances up to 4.5mi (7.2 km) when using the integrated 13-dBi antennas on both bridges.
Outdoor bridge calculation utility:
http://www.cisco.com/en/US/products/hw/wireless/ps458/products_tech_note09186a008009459b.shtml
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: