Cfwd TO TDM connected Voicemail

Unanswered Question
Sep 9th, 2008

anyone got any ideas on the following, apart from the obvious use a unity!


cluster2 - ictrunk - cluster1 - qsig - pbx - voicemail


Thats the setup, if you divert phone from cluster1 to voicemail works fine.


If you divert a phone in cluster2 to voicemail, it gets to the platform but the original called party string is missing?


As this works okay from cluster1, i'm thinking that it has to be either something in the cluster2 config, or the ICTrunk?


thanks


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Aaron Harrison Wed, 09/10/2008 - 03:48

Hi


No need to use Unity, your setup should work fine.


On your ICT, verify that you have these properties checked:


Redirecting Number IE Delivery - Outbound (on the no-VM cluster)

Redirecting Number IE Delivery - Inbound (on the cluster with the VM/qsig setup)


Or check both on both ends (not necessary, but should someone on the VM cluster forward to someone on cluster2 then it should show proper forward info).


If these are checked already, check for any translations etc that may be causing the number to not match what's configured on your Voicemail boxes...


Regards


Aaron


Please rate helpful posts.!



Actions

This Discussion