PIX no route to....

Unanswered Question
Sep 9th, 2008

PIX-501, Version 6.3(5)

My Interfaces are:

ip address outside

ip address inside

My routing table:

outside 1 OTHER static

inside 1 OTHER static

inside 1 CONNECT static

outside 1 CONNECT static

The inside interface is default-gateway for all traffic from the inside. The default route points to the outside. Some people want to communicate to a network via a gateway which is on the inside.

Whenever a connection attempt is made I see a log entry

%PIX-6-110001: No route to from

Currently I've no idea why this occors and would be grateful for any suggestions.


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
matej.polak Tue, 09/09/2008 - 02:56

Traffic that wants to leave the same interface (inside) where it has arrived will be dropped.

Source IP ( in on inside.

Destination according to the log is

According to the routing table the is on inside.

Packet arrived at inside and should be routed to inside = dropped.


This Discussion