PIX-501, Version 6.3(5)
My Interfaces are:
ip address outside 10.72.47.26 255.255.255.252
ip address inside 10.52.139.126 255.255.255.128
My routing table:
outside 0.0.0.0 0.0.0.0 10.72.47.25 1 OTHER static
inside 10.20.51.0 255.255.255.0 10.52.139.124 1 OTHER static
inside 10.52.139.0 255.255.255.128 10.52.139.126 1 CONNECT static
outside 10.72.47.24 255.255.255.252 10.72.47.26 1 CONNECT static
The inside interface is default-gateway for all traffic from the inside. The default route points to the outside. Some people want to communicate to a network 10.72.51.0/24 via a gateway 10.52.139.124 which is on the inside.
Whenever a connection attempt is made I see a log entry
%PIX-6-110001: No route to 10.20.51.18 from 10.52.139.60
Currently I've no idea why this occors and would be grateful for any suggestions.
Beat