WLC 4402 RADIUS problems

Unanswered Question
Sep 9th, 2008
User Badges:

Hi all ,


My WLC 4402 is running a version of 5.1.151.0 , my ACS is version 3.2. I have 1 AP connected properly to WLC and working with no problems. I configured everything just as is written in the WLC documentation to use RADIUS authentication by MAC-address of the clients connecting to my AP. The AP is a AIR-AP1252AG-E-K9 and it is normally registered in the controller , WLAN is configured , etc. RADIUS configured in the controller are prperly working and their is normal L3 connectivity in both ways. The loggin in the ACS shows strange thing , in the passed authentications there is no log that the controller was connected to the ACS and passed an authentication. In the ACS accounting log is a start , stop message for the mac-address of the client. In the controller sometimes there is message user uknown , or no message at all. In the controller RADIUS statistics there is no connection attemps for authenticaton or accounting. And after all my wireless clients are connection in the WLAN , they are recieving IP address normally. It's a really strange i will appriciate all help


Thanks in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode