Support for Appletalk on the 526 controller (and others to)

Unanswered Question
Sep 9th, 2008

I have noticed that from version 4.2x the controller does not seem to pass appletalk traffic through to the wireless clients.

I started to look around for some information but there are quite few resources for the 526. So i started to read the release notes and read the release notes for the 2100 controller and noticed that it doesn't support appletalk at all.

My question is simple, is it common for cisco's wireless products to not support appletalk? Is this maybe an step on the roadmap to get rid of appletalk completely =)

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
amritpatek Thu, 09/18/2008 - 08:12

Appletalk bridging is supported in 4400, WiSM, or 3750G. If you insist to use 526, you need to configure HREAP on the AP and HREAP local switching for the WLAN.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode