transfer not allow in CME 4.2

Answered Question
Sep 9th, 2008
User Badges:

I have just set conference and transcoding in CME but I can not transfer call, even internal.


sccp local GigabitEthernet0/1

sccp ccm 10.10.10.1 identifier 1 version 4.0

sccp

!


sccp ccm group 1

associate ccm 1 priority 1

associate profile 2 register CFB00170eaf1d20

associate profile 1 register MTP00170eaf1d20

dspfarm profile 1 transcode

codec g711ulaw

codec g711alaw

codec g729r8

codec g729ar8

codec g729abr8

maximum sessions 2

associate application SCCP

no shutdown

dspfarm profile 2 conference

codec g711ulaw

codec g711alaw

codec g729r8

codec g729ar8

codec g729abr8

maximum sessions 2

associate application SCCP

no shutdown


telephony-service

sdspfarm units 5

sdspfarm transcode sessions 2

sdspfarm tag 1 MTP00170eaf1d20

sdspfarm tag 2 CFB00170eaf1d20


***********************************

CME#show dspfarm all

Dspfarm Profile Configuration


Profile ID = 1, Service = TRANSCODING, Resource ID = 1

Profile Description :

Profile Service Mode : Non Secure

Profile Admin State : UP

Profile Operation State : ACTIVE

Application : SCCP Status : ASSOCIATED

Resource Provider : FLEX_DSPRM Status : UP

Number of Resource Configured : 2

Number of Resource Available : 2

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30

Codec : g711alaw, Maximum Packetization Period : 30

Codec : ilbc, Maximum Packetization Period : 60

Codec : g723r63, Maximum Packetization Period : 60

Codec : g723r53, Maximum Packetization Period : 60

Codec : gsmamr-nb, Maximum Packetization Period : 60

Codec : g729ar8, Maximum Packetization Period : 60

Codec : g729abr8, Maximum Packetization Period : 60

Codec : g729r8, Maximum Packetization Period : 60

Dspfarm Profile Configuration


Profile ID = 2, Service = CONFERENCING, Resource ID = 2

Profile Description :

Profile Service Mode : Non Secure

Profile Admin State : UP

Profile Operation State : ACTIVE

Application : SCCP Status : ASSOCIATED

Resource Provider : FLEX_DSPRM Status : UP

Number of Resource Configured : 2

Number of Resource Available : 2

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required

Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required

Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729abr8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required

Codec : g729br8, Maximum Packetization Period : 60 , Transcoder: Not Required



SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED


0 1 21.4.0 UP N/A FREE xcode 1 - - -

0 1 21.4.0 UP N/A FREE xcode 1 - - -

0 12 1.1.137 UP N/A FREE conf 2 - - -

0 12 1.1.137 UP N/A FREE conf 2 - - -


Total number of DSPFARM DSP channel(s) 4



Correct Answer by Chris Deren about 8 years 8 months ago

conferecning and transcoding has nothing to do with transfers (unless you need transcoded calls). Make sure you have the following command under telephony-service


transfer-pattern .T


or somthing similar.


HTH,


Chris

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Chris Deren Tue, 09/09/2008 - 08:33
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

conferecning and transcoding has nothing to do with transfers (unless you need transcoded calls). Make sure you have the following command under telephony-service


transfer-pattern .T


or somthing similar.


HTH,


Chris

filiberto.aguirre Tue, 09/09/2008 - 08:55
User Badges:

Hi Chris,


Your right, I forgot that command


now it work the tranfers


thanks for your time


regards

Actions

This Discussion