lwapp and open fw ports

Unanswered Question
Sep 9th, 2008

Hi, can anyone tell me exactly what ports I need to open on my FW in a datacentre to remote branch scenario?

WLC located on it's own DMZ and the FW is between WCS,WLCS and LAP

thanks

Tyrone

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bbxie Tue, 09/09/2008 - 14:59

Hi, what you need to open in FW are:

Open ports for:

UDP port 12222 for LWAPP Data Packets and UDP port 12223

for LWAPP Control Messages

If you have other WLC which belong to the same mobility group out of the DMZ area, then you also need to open:

Inter-Controller Tunneled Client Data - IP Protocol 97

Inter-Controller Control Traffic - UDP Port 16666 (or 16667, if encrypted)

Optional management/operational protocols:

SSH/Telnet - TCP Port 22/23

TFTP - UDP Port 69

NTP - UDP Port 123

SNMP - UDP Ports 161 (gets and sets) and 162 (traps)

HTTPS/HTTP - TCP Port 443/80

Syslog- TCP Port 514

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode