Client users dialing 911 accidentally we think

Unanswered Question
Sep 9th, 2008
User Badges:

I have a client that is dialing 911 from there facility. I need to track down who it is or if it is a misconfiguration somewhere. What is the quickest way to put my finder on the caller? I don't have an exact time just a date during a specific week.


Looking at CDR's but there is 340 pages of detail under the call detail user report.


Any ideas?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jaime Valencia Tue, 09/09/2008 - 16:14
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

unfortunately it's either CDR or a CUCM trace and i can tell for sure it's going to be over 340 pages of traces for the same amount of calls


with a timeframe best bet is CUCM trace, without it CDR and if enabled then look into CUCM traces


HTH


java


if this helps, please rate

TODD BERGMAN Tue, 09/09/2008 - 17:08
User Badges:

I went through the traces and nothing for that day. I downloaded the trace file for sept 6 and opened with wordpad and did not find any 911 or 9911 calls. How should I setup my trace configuration to capture this.


Do traces capture hangups? I would suspect traces would capture any dialed digits.

Jaime Valencia Wed, 09/10/2008 - 06:44
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

you need to enable them at detailed level using default settings to capture this, traces do capture hangups and from which side they came


HTH


java


if this helps, please rate

Actions

This Discussion