09-10-2008 03:06 AM - edited 03-13-2019 05:38 PM
Hi,
Want to understand the difference b/w to GPL SKUs:
{
Part Number: MCS-7816-I3-IPC1
Description: HW Only MCS-7816-I3 with 2GB RAM and One 160GB SATA HD
and
Part Number: MCS7816I3-K9-CMB2
Description: Unified CM 6.1 7816-I3 Appliance, 0 Seats
}
The price is the same for both entries. The hardware, I think, is also
similar. I suppose the first one (MCS-7816-I3-IPC1) does not contain any
CD/DVD software package. Whereas the second one (MCS7816I3-K9-CMB2) does.
Am I right ?
Are there any other differences ?
Solved! Go to Solution.
09-15-2008 04:44 AM
Hey Tobivan,
Life is great here! Hopefully for you as well :)
The "CMA/CMB" designation on the Part# does indicate a "pre-loaded" appliance. So yes, this server would be shipped with the Linux OS and Communications Manager 6.1 pre-loaded. The "IPC1" Version will not ship with any CCM discs and they will need to be ordered seperately :)
Here are some examples;
The server appliance is preinstalled with an operating system and the Cisco Unified Communications Manager application. Cisco Unified Communications Manager is fully operational upon startup, requiring entry of just a few configuration variables such as IP address and domain.
Product part number
MCS7816H3-K9-CMB2
Preload
Cisco Unified Communications Manager 6.1
OS
Included
CMB1 = Cisco Unified Communications Manager 6.0
CMB2 = Cisco Unified Communications Manager 6.1
CMA2 = Cisco Unified Communications Manager 5.1
Hope this helps!
Rob
09-10-2008 05:00 AM
Hey Tobivan,
Hope all is well my friend! Maybe after my mistakes from last week I should steer clear but....
The MCS7816I3-K9-CMB2 is actually a "pre-loaded" Appliance with CCM 6.1
MCS-7816-I3-IPC1
MCS7816I3-K9-CMB2 = Unified CM 6.1 7816-I3 Appliance, 0 Seats
Cisco Unified Communications Manager Server Support Matrix
Hope this helps!
Rob
09-14-2008 10:59 PM
Hey, Rob.
I hope you are fine.
When you saying 'the MCS7816I3-K9-CMB2 is a "pre-loaded" appliance with CUCM 6.1'
you mean that I got the server in the box that has already CUCM installed as Operating
System by vendor ? Or I got only server with DVD discs with CUCM software that I must install manually ?
Also does MCS-7816-I3-IPC1 contain any discs in the box ?
Thank you.
09-15-2008 04:44 AM
Hey Tobivan,
Life is great here! Hopefully for you as well :)
The "CMA/CMB" designation on the Part# does indicate a "pre-loaded" appliance. So yes, this server would be shipped with the Linux OS and Communications Manager 6.1 pre-loaded. The "IPC1" Version will not ship with any CCM discs and they will need to be ordered seperately :)
Here are some examples;
The server appliance is preinstalled with an operating system and the Cisco Unified Communications Manager application. Cisco Unified Communications Manager is fully operational upon startup, requiring entry of just a few configuration variables such as IP address and domain.
Product part number
MCS7816H3-K9-CMB2
Preload
Cisco Unified Communications Manager 6.1
OS
Included
CMB1 = Cisco Unified Communications Manager 6.0
CMB2 = Cisco Unified Communications Manager 6.1
CMA2 = Cisco Unified Communications Manager 5.1
Hope this helps!
Rob
09-15-2008 09:55 PM
Rob, as always, a huge gratitude for your participation.
09-16-2008 04:36 AM
Hi Tobivan,
You are most welcome. It's always a pleasure my friend!
Cheers,
Rob
09-16-2008 11:57 PM
Hi,
MCS-7816-I3-IPC1 is a server ready for Call Manager 4.x which is Windows based.
MCS7816I3-K9-CMB2 is a server ready for Call Manager version 6.1 which is Linux based.
No CD/DVD is available with either models.
Hope this answers your queries.
Regards
Denny
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: