Configuring WS-C2950C-24

Answered Question
Sep 10th, 2008
User Badges:

WS-C2950C-24 IOS V12.1(20)EA1. I am trying to configure the vlan to no ip redirects and no proxy-arp with no success. I have tried configuring these settings under interface w/o success either. Does this IOS version not recognize these settings?

Correct Answer by MUHAMMAD SHAHEEN about 8 years 8 months ago

Hi,


these options are available in version 12.1(22)EA9 onward.


If you upgrade to this or higher you should be able to use all these. I have following in my configuration

no ip redirects

no ip unreacheables

no ip proxy-arp

no ip route-cache


HTH

Shaheen

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
glen.grant Wed, 09/10/2008 - 06:35
User Badges:
  • Purple, 4500 points or more

Those are layer 3 functions , the 2950 is a layer 2 switch . the svi is used to manage the switch only .

Correct Answer
MUHAMMAD SHAHEEN Wed, 09/10/2008 - 08:17
User Badges:
  • Silver, 250 points or more

Hi,


these options are available in version 12.1(22)EA9 onward.


If you upgrade to this or higher you should be able to use all these. I have following in my configuration

no ip redirects

no ip unreacheables

no ip proxy-arp

no ip route-cache


HTH

Shaheen

kcurry9806 Wed, 09/10/2008 - 08:39
User Badges:

Thanks Shaheen. So these settings are available in the IOS version 12.1(22)EA9 and later. Do you know is this documented anywhere on the Cisco website?


This is interesting because we just set these variables in a WS-C2962G-24TC-L switch that the CNA identifies as a layer 2 switch also. That switch has version 12.2(25)SEE2 installed.


Ken

Actions

This Discussion