INSPECT SIP Change ASA 7.2

Unanswered Question
Sep 10th, 2008

Hi - We have a NEC VOIP phone system that uses SIP port 5080 not the default port 5060. Can the inspect sip be changed on the Cisco ASA 7.2. Firewall like fixup could be changed on the PIX Firewall?

Thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
suschoud Wed, 09/10/2008 - 11:58

Here you go:

ASA-5510-8x(config)# policy-map global_policy

ASA-5510-8x(config-pmap)# class inspection_default

ASA-5510-8x(config-pmap-c)# no inspect sip

ASA-5510-8x(config-pmap-c)# exit

ASA-5510-8x(config-pmap)# exit

ASA-5510-8x(config)# class-map mymap

ASA-5510-8x(config-cmap)# match port tcp eq 5080

ASA-5510-8x(config-cmap)# exit

ASA-5510-8x(config)# poli

ASA-5510-8x(config)# policy-map global_policy

ASA-5510-8x(config-pmap)# class

ASA-5510-8x(config-pmap)# class mymap

ASA-5510-8x(config-pmap-c)# ins

ASA-5510-8x(config-pmap-c)# inspect sip

ASA-5510-8x(config-pmap-c)# end

PLease rate if helpful

Regards,

Sushil

ptr609 Wed, 09/10/2008 - 12:11

Thanks Sushil, you are really fast with your post! I will try this out.

Paul.

Actions

This Discussion