09-11-2008 01:38 AM - edited 03-11-2019 06:42 AM
Hi, Freiends
Can you please forward procedure for configuring fulltime vpn tunnel between PIX515 to ASA firewall.
Thank you very much for support.
Solved! Go to Solution.
09-11-2008 02:02 AM
Francisco,
Yes he would need a cco login - well pointed out.
Nice find on "free" page!
Andrew.
View solution in original post
09-11-2008 01:47 AM
See the below link for a config examples:-
http://www.cisco.com/en/US/customer/products/ps6120/products_configuration_example09186a0080950890.shtml
http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9950.shtml
HTH>
09-11-2008 01:54 AM
Andrew, i think he will need CCO login to access the links.
see http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a87f7.shtml No CCO login required.
The ASA 5500 series version 7.x/8.x runs the same software seen in PIX version 7.x/8.x
Francisco
Thanks andrew|Francisco for your reply.
very snappy links for refrence.
Thx Again.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
