Can't read from control socket. Socket error = #10054. FTP ASA

Unanswered Question
Sep 11th, 2008
User Badges:

hi,

i have configured FTP server in DMZ zone of the ASA server. i have two public ip addresses a.b.c.d and e.f.g.h when i configured FTP with a.b.c.d it works fine for the inside users and internet users, but when i configured it with e.f.g.h it worked for the inside users but outside users get error message "Can't read from control socket. Socket error = #10054."

My FTP server is LINUX based and is not managed by me

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
smohanasundaram Thu, 09/11/2008 - 21:15
User Badges:

Hi


e.f.g.h is your ASA External Interface ip.so you cannot able to use that ip in your FTP Server( Static NAT).


static (DMZ,outside) a.b.c.d 10.5.0.5 netmask 255.255.255.255


the above line is your Static NAT of FTP Server.


regs


S.Mohana sundaram

itdsmartnet Thu, 09/11/2008 - 21:28
User Badges:

hi,

sorry that was typing error actually , it was r.s.t.u ip , one thing more when i change static mapping do i need to clear xlate table, may be it was causing problem.

Thanks

Actions

This Discussion