Cisco Call Manager gateway registration MGCP

Unanswered Question
Sep 11th, 2008

Hi, I have problem with registration.. I have 2 box of ISDN , one box is connected to port 0/2/1 and he is successful register with call manager but second box on port 0/2/0 can not register it is allways unregister, in debuging i see this:

mgcp_msg_ack:6065,Updating (*)=172.17.1.95

*Sep 11 11:16:43.851: *:NO-MATCH, 172.17.1.95:2427, 172.17.1.95

*Sep 11 11:16:43.851: BRI/S0/*:NO-MATCH, 172.17.1.95:2427, 172.17.1.95

*Sep 11 11:16:43.851: BRI/S0/SU2/*:NO-MATCH, 172.17.1.95:2427, 172.17.1.95

*Sep 11 11:16:43.851: BRI/S0/SU2/P1/*:NO-MATCH, , 172.17.1.95

*Sep 11 11:16:43.851: BRI/S0/SU2/P1/1:NO-MATCH, 172.17.1.95:2427, 172.17.1.95

*Sep 11 11:16:43.851: BRI/S0/SU2/P1/2:NO-MATCH, 172.17.1.95:2427, 172.17.1.95

*Sep 11 11:16:43.851: BRI/S0/SU2/P0/*:NO-MATCH, , 172.17.1.95

*Sep 11 11:16:43.879: MGCP Packet received from 172.17.1.95:2427--->

AUEP 1136 BRI/S0/SU2/P0/[email protected] MGCP 0.1

interface BRI0/2/0

no ip address

isdn switch-type basic-net3

isdn overlap-receiving

isdn point-to-point-setup

isdn incoming-voice voice

isdn skipsend-idverify

isdn bind-l3 ccm-manager service mgcp

isdn static-tei 0

end

interface BRI0/2/1

no ip address

isdn switch-type basic-net3

isdn overlap-receiving

isdn point-to-point-setup

isdn incoming-voice voice

isdn bind-l3 ccm-manager service mgcp

isdn static-tei 0

isdn skipsend-idverify

What i need to do to get bouth box register with CCM. tnx

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Michael Owuor Thu, 09/11/2008 - 04:48

Hi Anis,

Can you confirm that in CallManager, port 0/2/0 has been configured as an endpoint separate from endpoint 0/2/1? Can you post the screenshot of the configuration of port 0/2/0?

Thanks,

Michael.

aniss12345 Thu, 09/11/2008 - 05:30

I hope that this will help you... i will post more show command:

ccm-manager mgcp

mgcp

mgcp call-agent 172.17.1.95 2427 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp rtp unreachable timeout 1000 action notify

mgcp modem passthrough voip mode nse

mgcp package-capability rtp-package

no mgcp package-capability res-package

mgcp package-capability sst-package

no mgcp package-capability fxr-package

mgcp package-capability pre-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp rtp payload-type g726r16 static

mgcp profile default

service mgcpapp

service mgcpapp

combisbh-sar_rt01#show running-config | include ccm

isdn bind-l3 ccm-manager service mgcp

ccm-manager mgcp

ccm-manager music-on-hold

ccm-manager config server 172.17.1.95

ccm-manager config

Attachment: 
aniss12345 Thu, 09/11/2008 - 05:57

I will copy part of configuration for CCM and CCME, on the same router i have CCM and CCME, one ISDN box which working 0/2/1 is CCM, other interface bri 0/2/0 it is CCME , so when i want register interface 0/2/0 for CCM i put 2 command :

isdn bind-l3 ccm-manager service mgcp

isdn static-tei 0

but it is still unregister i am not sure why ?

resource policy

!

clock timezone Warsaw 1

network-clock-participate wic 2

mmi polling-interval 60

no mmi auto-configure

no mmi pvc

mmi snmp-timeout 180

ip cef

!

isdn switch-type basic-net3

!

voice-card 0

!

voice service pots

!

voice class codec 100

codec preference 1 g711alaw

codec preference 2 g711ulaw

codec preference 3 g729r8

!

voice class h323 1

h225 timeout tcp establish 3

h225 timeout setup 25

!

voice class dualtone-detect-params 90

freq-max-power 6

freq-min-power 25

freq-power-twist 15

freq-max-delay 16

cadence-variation 8

!

voice translation-rule 10

rule 1 /\(.*\)880$/ /1070/

rule 2 // // type any unknown

!

voice translation-rule 11

rule 1 /\([7-9].\)/ /10\1/

rule 2 // // type any unknown

!

voice translation-profile Ulaz-4769XX

translate called 11

!

voice translation-profile unutra

translate called 10

!

interface FastEthernet0/0.10

description [CISCO IP PHONE]-

encapsulation dot1Q 10

ip address 172.17.2.1 255.255.255.192

ip virtual-reassembly

no snmp trap link-status

!

interface BRI0/2/0

no ip address

isdn switch-type basic-net3

isdn overlap-receiving

isdn point-to-point-setup

isdn incoming-voice voice

isdn skipsend-idverify

isdn bind-l3 ccm-manager service mgcp

isdn static-tei 0

!

interface BRI0/2/1

no ip address

isdn switch-type basic-net3

isdn overlap-receiving

isdn point-to-point-setup

isdn incoming-voice voice

isdn bind-l3 ccm-manager service mgcp

isdn static-tei 0

isdn skipsend-idverify

!

!

control-plane

!

voice-port 0/2/0

compand-type a-law

!

voice-port 0/2/1

compand-type a-law

!

ccm-manager mgcp

ccm-manager music-on-hold

ccm-manager config server 172.17.1.95

ccm-manager config

!

mgcp

mgcp call-agent 172.17.1.95 2427 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp rtp unreachable timeout 1000 action notify

mgcp modem passthrough voip mode nse

mgcp package-capability rtp-package

no mgcp package-capability res-package

mgcp package-capability sst-package

no mgcp package-capability fxr-package

mgcp package-capability pre-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp rtp payload-type g726r16 static

!

mgcp profile default

!

dial-peer voice 100 pots

destination-pattern 0T

direct-inward-dial

port 0/2/0

!

dial-peer voice 1 pots

translation-profile incoming unutra

incoming called-number .T

no digit-strip

direct-inward-dial

port 0/2/0

forward-digits 0

!

dial-peer voice 2 pots

translation-profile incoming Ulaz-4769XX

incoming called-number [7-9].

direct-inward-dial

port 0/2/1

!

dial-peer voice 3 pots

destination-pattern 9T

direct-inward-dial

port 0/2/1

!

dial-peer voice 4 pots

service mgcpapp

direct-inward-dial

port 0/2/1

!

dial-peer voice 5 pots

service mgcpapp

direct-inward-dial

port 0/2/0

!

gateway

timer receive-rtp 1200

!

credentials

telephony-service

load 7970 term71.default.loads

load 7912 CP7912050000SCCP041115A

max-ephones 30

max-dn 50

ip source-address 172.17.2.1 port 2000

auto assign 20 to 30 type CIPC

timeouts interdigit 3

url information http://172.17.1.1/ccme.html

time-format 24

date-format dd-mm-yy

create cnf-files version-stamp Jan 01 2002 00:00:00

max-conferences 4 gain -6

dn-webedit

time-webedit

secondary-dialtone 0

login timeout 120 clear 23:00

xmltest

Michael Owuor Thu, 09/11/2008 - 06:05

Thanks for posting the configuration. After adding the two commands to register 0/2/0 as an MGCP endpoint, you might have to restart the MGCP process on the router by doing:

no mgcp

mgcp

If you could capture the output of debug mgcp packet when resetting the MGCP process that would be great.

Also, can you confirm that the configuration on the router has 'ip domain-name' statement.

Thanks,

Michael.

aniss12345 Thu, 09/11/2008 - 06:00

I will copy part of configuration for CCM and CCME, on the same router i have CCM and CCME, one ISDN box which working 0/2/1 is CCM, other interface bri 0/2/0 it is CCME , so when i want register interface 0/2/0 for CCM i put 2 command :

isdn bind-l3 ccm-manager service mgcp

isdn static-tei 0

but it is still unregister i am not sure why ?

resource policy

!

clock timezone Warsaw 1

network-clock-participate wic 2

mmi polling-interval 60

no mmi auto-configure

no mmi pvc

mmi snmp-timeout 180

ip cef

!

isdn switch-type basic-net3

!

voice-card 0

!

voice service pots

!

voice class codec 100

codec preference 1 g711alaw

codec preference 2 g711ulaw

codec preference 3 g729r8

!

voice class h323 1

h225 timeout tcp establish 3

h225 timeout setup 25

!

voice class dualtone-detect-params 90

freq-max-power 6

freq-min-power 25

freq-power-twist 15

freq-max-delay 16

cadence-variation 8

!

voice translation-rule 10

rule 1 /\(.*\)880$/ /1070/

rule 2 // // type any unknown

!

voice translation-rule 11

rule 1 /\([7-9].\)/ /10\1/

rule 2 // // type any unknown

!

voice translation-profile Ulaz-4769XX

translate called 11

!

voice translation-profile unutra

translate called 10

!

interface FastEthernet0/0.10

description [CISCO IP PHONE]-

encapsulation dot1Q 10

ip address 172.17.2.1 255.255.255.192

ip virtual-reassembly

no snmp trap link-status

!

interface BRI0/2/0

no ip address

isdn switch-type basic-net3

isdn overlap-receiving

isdn point-to-point-setup

isdn incoming-voice voice

isdn skipsend-idverify

isdn bind-l3 ccm-manager service mgcp

isdn static-tei 0

!

interface BRI0/2/1

no ip address

isdn switch-type basic-net3

isdn overlap-receiving

isdn point-to-point-setup

isdn incoming-voice voice

isdn bind-l3 ccm-manager service mgcp

isdn static-tei 0

isdn skipsend-idverify

!

!

control-plane

!

voice-port 0/2/0

compand-type a-law

!

voice-port 0/2/1

compand-type a-law

!

ccm-manager mgcp

ccm-manager music-on-hold

ccm-manager config server 172.17.1.95

ccm-manager config

!

mgcp

mgcp call-agent 172.17.1.95 2427 service-type mgcp version 0.1

mgcp dtmf-relay voip codec all mode out-of-band

mgcp rtp unreachable timeout 1000 action notify

mgcp modem passthrough voip mode nse

mgcp package-capability rtp-package

no mgcp package-capability res-package

mgcp package-capability sst-package

no mgcp package-capability fxr-package

mgcp package-capability pre-package

no mgcp timer receive-rtcp

mgcp sdp simple

mgcp rtp payload-type g726r16 static

!

mgcp profile default

!

dial-peer voice 100 pots

destination-pattern 0T

direct-inward-dial

port 0/2/0

!

dial-peer voice 1 pots

translation-profile incoming unutra

incoming called-number .T

no digit-strip

direct-inward-dial

port 0/2/0

forward-digits 0

!

dial-peer voice 2 pots

translation-profile incoming Ulaz-4769XX

incoming called-number [7-9].

direct-inward-dial

port 0/2/1

!

dial-peer voice 3 pots

destination-pattern 9T

direct-inward-dial

port 0/2/1

!

dial-peer voice 4 pots

service mgcpapp

direct-inward-dial

port 0/2/1

!

dial-peer voice 5 pots

service mgcpapp

direct-inward-dial

port 0/2/0

!

gateway

timer receive-rtp 1200

!

credentials

telephony-service

load 7970 term71.default.loads

load 7912 CP7912050000SCCP041115A

max-ephones 30

max-dn 50

ip source-address 172.17.2.1 port 2000

auto assign 20 to 30 type CIPC

timeouts interdigit 3

url information http://172.17.1.1/ccme.html

time-format 24

date-format dd-mm-yy

create cnf-files version-stamp Jan 01 2002 00:00:00

max-conferences 4 gain -6

dn-webedit

time-webedit

secondary-dialtone 0

login timeout 120 clear 23:00

xmltest

Actions

This Discussion