09-11-2008 04:15 AM - edited 03-18-2019 09:36 PM
Hi, I have problem with registration.. I have 2 box of ISDN , one box is connected to port 0/2/1 and he is successful register with call manager but second box on port 0/2/0 can not register it is allways unregister, in debuging i see this:
mgcp_msg_ack:6065,Updating (*)=172.17.1.95
*Sep 11 11:16:43.851: *:NO-MATCH, 172.17.1.95:2427, 172.17.1.95
*Sep 11 11:16:43.851: BRI/S0/*:NO-MATCH, 172.17.1.95:2427, 172.17.1.95
*Sep 11 11:16:43.851: BRI/S0/SU2/*:NO-MATCH, 172.17.1.95:2427, 172.17.1.95
*Sep 11 11:16:43.851: BRI/S0/SU2/P1/*:NO-MATCH, , 172.17.1.95
*Sep 11 11:16:43.851: BRI/S0/SU2/P1/1:NO-MATCH, 172.17.1.95:2427, 172.17.1.95
*Sep 11 11:16:43.851: BRI/S0/SU2/P1/2:NO-MATCH, 172.17.1.95:2427, 172.17.1.95
*Sep 11 11:16:43.851: BRI/S0/SU2/P0/*:NO-MATCH, , 172.17.1.95
*Sep 11 11:16:43.879: MGCP Packet received from 172.17.1.95:2427--->
AUEP 1136 BRI/S0/SU2/P0/1@xxxx.xxxx.com MGCP 0.1
interface BRI0/2/0
no ip address
isdn switch-type basic-net3
isdn overlap-receiving
isdn point-to-point-setup
isdn incoming-voice voice
isdn skipsend-idverify
isdn bind-l3 ccm-manager service mgcp
isdn static-tei 0
end
interface BRI0/2/1
no ip address
isdn switch-type basic-net3
isdn overlap-receiving
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
isdn static-tei 0
isdn skipsend-idverify
What i need to do to get bouth box register with CCM. tnx
09-11-2008 04:48 AM
Hi Anis,
Can you confirm that in CallManager, port 0/2/0 has been configured as an endpoint separate from endpoint 0/2/1? Can you post the screenshot of the configuration of port 0/2/0?
Thanks,
Michael.
09-11-2008 05:30 AM
I hope that this will help you... i will post more show command:
ccm-manager mgcp
mgcp
mgcp call-agent 172.17.1.95 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp rtp payload-type g726r16 static
mgcp profile default
service mgcpapp
service mgcpapp
combisbh-sar_rt01#show running-config | include ccm
isdn bind-l3 ccm-manager service mgcp
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 172.17.1.95
ccm-manager config
09-11-2008 05:44 AM
can you send the whole config of the gateway?
09-11-2008 05:57 AM
I will copy part of configuration for CCM and CCME, on the same router i have CCM and CCME, one ISDN box which working 0/2/1 is CCM, other interface bri 0/2/0 it is CCME , so when i want register interface 0/2/0 for CCM i put 2 command :
isdn bind-l3 ccm-manager service mgcp
isdn static-tei 0
but it is still unregister i am not sure why ?
resource policy
!
clock timezone Warsaw 1
network-clock-participate wic 2
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip cef
!
isdn switch-type basic-net3
!
voice-card 0
!
voice service pots
!
voice class codec 100
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729r8
!
voice class h323 1
h225 timeout tcp establish 3
h225 timeout setup 25
!
voice class dualtone-detect-params 90
freq-max-power 6
freq-min-power 25
freq-power-twist 15
freq-max-delay 16
cadence-variation 8
!
voice translation-rule 10
rule 1 /\(.*\)880$/ /1070/
rule 2 // // type any unknown
!
voice translation-rule 11
rule 1 /\([7-9].\)/ /10\1/
rule 2 // // type any unknown
!
voice translation-profile Ulaz-4769XX
translate called 11
!
voice translation-profile unutra
translate called 10
!
interface FastEthernet0/0.10
description [CISCO IP PHONE]-
encapsulation dot1Q 10
ip address 172.17.2.1 255.255.255.192
ip virtual-reassembly
no snmp trap link-status
!
interface BRI0/2/0
no ip address
isdn switch-type basic-net3
isdn overlap-receiving
isdn point-to-point-setup
isdn incoming-voice voice
isdn skipsend-idverify
isdn bind-l3 ccm-manager service mgcp
isdn static-tei 0
!
interface BRI0/2/1
no ip address
isdn switch-type basic-net3
isdn overlap-receiving
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
isdn static-tei 0
isdn skipsend-idverify
!
!
control-plane
!
voice-port 0/2/0
compand-type a-law
!
voice-port 0/2/1
compand-type a-law
!
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 172.17.1.95
ccm-manager config
!
mgcp
mgcp call-agent 172.17.1.95 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp rtp payload-type g726r16 static
!
mgcp profile default
!
dial-peer voice 100 pots
destination-pattern 0T
direct-inward-dial
port 0/2/0
!
dial-peer voice 1 pots
translation-profile incoming unutra
incoming called-number .T
no digit-strip
direct-inward-dial
port 0/2/0
forward-digits 0
!
dial-peer voice 2 pots
translation-profile incoming Ulaz-4769XX
incoming called-number [7-9].
direct-inward-dial
port 0/2/1
!
dial-peer voice 3 pots
destination-pattern 9T
direct-inward-dial
port 0/2/1
!
dial-peer voice 4 pots
service mgcpapp
direct-inward-dial
port 0/2/1
!
dial-peer voice 5 pots
service mgcpapp
direct-inward-dial
port 0/2/0
!
gateway
timer receive-rtp 1200
!
credentials
telephony-service
load 7970 term71.default.loads
load 7912 CP7912050000SCCP041115A
max-ephones 30
max-dn 50
ip source-address 172.17.2.1 port 2000
auto assign 20 to 30 type CIPC
timeouts interdigit 3
url information http://172.17.1.1/ccme.html
time-format 24
date-format dd-mm-yy
create cnf-files version-stamp Jan 01 2002 00:00:00
max-conferences 4 gain -6
dn-webedit
time-webedit
secondary-dialtone 0
login timeout 120 clear 23:00
xmltest
09-11-2008 06:01 AM
do a show isdn status
09-11-2008 06:05 AM
Thanks for posting the configuration. After adding the two commands to register 0/2/0 as an MGCP endpoint, you might have to restart the MGCP process on the router by doing:
no mgcp
mgcp
If you could capture the output of debug mgcp packet when resetting the MGCP process that would be great.
Also, can you confirm that the configuration on the router has 'ip domain-name' statement.
Thanks,
Michael.
09-11-2008 06:22 AM
Thanx that is, when i put no mgcp and mgcp
its work!
09-11-2008 06:27 AM
Excellent. Thanks for the update.
Regards,
Michael.
09-11-2008 06:00 AM
I will copy part of configuration for CCM and CCME, on the same router i have CCM and CCME, one ISDN box which working 0/2/1 is CCM, other interface bri 0/2/0 it is CCME , so when i want register interface 0/2/0 for CCM i put 2 command :
isdn bind-l3 ccm-manager service mgcp
isdn static-tei 0
but it is still unregister i am not sure why ?
resource policy
!
clock timezone Warsaw 1
network-clock-participate wic 2
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip cef
!
isdn switch-type basic-net3
!
voice-card 0
!
voice service pots
!
voice class codec 100
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729r8
!
voice class h323 1
h225 timeout tcp establish 3
h225 timeout setup 25
!
voice class dualtone-detect-params 90
freq-max-power 6
freq-min-power 25
freq-power-twist 15
freq-max-delay 16
cadence-variation 8
!
voice translation-rule 10
rule 1 /\(.*\)880$/ /1070/
rule 2 // // type any unknown
!
voice translation-rule 11
rule 1 /\([7-9].\)/ /10\1/
rule 2 // // type any unknown
!
voice translation-profile Ulaz-4769XX
translate called 11
!
voice translation-profile unutra
translate called 10
!
interface FastEthernet0/0.10
description [CISCO IP PHONE]-
encapsulation dot1Q 10
ip address 172.17.2.1 255.255.255.192
ip virtual-reassembly
no snmp trap link-status
!
interface BRI0/2/0
no ip address
isdn switch-type basic-net3
isdn overlap-receiving
isdn point-to-point-setup
isdn incoming-voice voice
isdn skipsend-idverify
isdn bind-l3 ccm-manager service mgcp
isdn static-tei 0
!
interface BRI0/2/1
no ip address
isdn switch-type basic-net3
isdn overlap-receiving
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
isdn static-tei 0
isdn skipsend-idverify
!
!
control-plane
!
voice-port 0/2/0
compand-type a-law
!
voice-port 0/2/1
compand-type a-law
!
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 172.17.1.95
ccm-manager config
!
mgcp
mgcp call-agent 172.17.1.95 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp rtp payload-type g726r16 static
!
mgcp profile default
!
dial-peer voice 100 pots
destination-pattern 0T
direct-inward-dial
port 0/2/0
!
dial-peer voice 1 pots
translation-profile incoming unutra
incoming called-number .T
no digit-strip
direct-inward-dial
port 0/2/0
forward-digits 0
!
dial-peer voice 2 pots
translation-profile incoming Ulaz-4769XX
incoming called-number [7-9].
direct-inward-dial
port 0/2/1
!
dial-peer voice 3 pots
destination-pattern 9T
direct-inward-dial
port 0/2/1
!
dial-peer voice 4 pots
service mgcpapp
direct-inward-dial
port 0/2/1
!
dial-peer voice 5 pots
service mgcpapp
direct-inward-dial
port 0/2/0
!
gateway
timer receive-rtp 1200
!
credentials
telephony-service
load 7970 term71.default.loads
load 7912 CP7912050000SCCP041115A
max-ephones 30
max-dn 50
ip source-address 172.17.2.1 port 2000
auto assign 20 to 30 type CIPC
timeouts interdigit 3
url information http://172.17.1.1/ccme.html
time-format 24
date-format dd-mm-yy
create cnf-files version-stamp Jan 01 2002 00:00:00
max-conferences 4 gain -6
dn-webedit
time-webedit
secondary-dialtone 0
login timeout 120 clear 23:00
xmltest
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: