CCM 5/6 ping packet loss

marco.alghisi · ‎09-11-2008

Hi all,

is it a normal condition that on every Call Manager version 5.X i have a packet loss during ping ?

In particular every 5 packet reachable one is lost.

I have tried on 6 different cluster and 2 different customer.

Below an output of the problem.

GKB#ping

Protocol [ip]:

Target IP address: X.X.X.X

Repeat count [5]: 1000

Datagram size [100]: 10000

Timeout in seconds [2]:

Extended commands [n]:

Sweep range of sizes [n]:

Type escape sequence to abort.

Sending 1000, 10000-byte ICMP Echos to X.X.X.X, timeout is 2 seconds:

!!!!!!!!!.!!!!!!!!!.!!!!!!!!.!!!!!!!!.!!!!!!!!.!!!!!!!!.!!!!!!!!.!!!!!

!!!.!!!!!!!!.!!!!!!!!!.!.!!!!!!!!.!!!!!!!!!.!!!.!!!!!!!!.!!!!!!!!.!!!!

!!!!.!!!.!!!!!!.!.!.!.!!!!!!!!.!!!!!!!!.!!!!!!!!.!!!!!!!.!!!!!!!!!.!!!

!!!!!!.!!!!!!!!!.!!!!!!!!.!!!!!!!!.!!!!.!.!!!!.!!!!!!!.!!!!!.

Thanks to all

Marco

Kenneth Mohammed · ‎09-11-2008

Hello Marco,

I'm guessing that this is by design, as I experienced the same issue with CUCM 6.x. I could never get a definitive answer from cisco however.

Jaime Valencia · ‎09-11-2008

nothing to worry about, it's a security feature they implemented on the system. all linux versions do the same

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

marco.alghisi · ‎09-11-2008

Thanks to all for the quick reply.

Regards

Marco

mmartono · ‎11-25-2009

Is there any formal documentation for this ?