×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Site-to-site VPN: IKE Initiator unable to find policy

Unanswered Question
Sep 11th, 2008
User Badges:
  • Silver, 250 points or more

Can someone help me with this?


Everything has been working great until last night. No changes were made to any configuration.


All of a sudden I'm getting these errors. Let me give you a summary of the network.


The remote site has two networks:

10.10.30.0/24

10.10.130.0/25


The corporate site has two networks:

10.10.10.0/24

10.10.110.0/25




Traffic connections to/from networks 10.10.10.0 and 10.10.30.0 are just fine. Traffic connections to/from networks 10.10.110.0 and 10.10.130.0 do not work and I get the IKE initiator errors.


Need help resolving this ASAP as it involves a voice deployment.


Thank you in advance.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jjohnston1127 Thu, 09/11/2008 - 06:30
User Badges:
  • Silver, 250 points or more

Just an FYI, removing the crypto map from the interface on the remote ASA and re-applying it fixes the problem.


Is there any bugs related to this in the 8.0(3) code?

tgrundbacher Wed, 12/16/2009 - 04:52
User Badges:

Hi


Could you solve the issue in the meantime? I'm having the exact same problem on an ASA running 8.2(1) with a VPN site-to-site peer.


Regards

Toni

Actions

This Discussion