License ASA5510-sec-bun-k9 with a k8 image

Unanswered Question
Sep 11th, 2008

Hello,

My company buyed an ASA5510-sec-bun-k9

but when I do show ver I have this output : asa707-k8.bin

I am very surprised, I have to use PAK ?

or I have to upgrade the image?

Licensed features for this platform:

Maximum Physical Interfaces : Unlimited

Maximum VLANs : 25

Inside Hosts : Unlimited

Failover : Active/Standby

VPN-DES : Enabled

VPN-3DES-AES : Enabled

Security Contexts : 0

GTP/GPRS : Disabled

VPN Peers : 150

This platform has an ASA 5510 Security Plus license.

Thanks

Regards

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Richard Burts Thu, 09/11/2008 - 09:50

Enrique

I believe that you are ok and do not need to do anything. It is perhaps confusing but there appears to be a difference between k8 and k9 in the licensing (k8 gets DES but not 3DES/AES while k9 gets 3DES/AES) and you have the k9 license (since 3DES/AES is enabled). However in the software there is only the k8 image file. I checked in the software download pages on the Cisco web site and there are no k9 images listed, only k8 images.

So I believe that your company received what it purchased and there is no need to do anything special.

HTH

Rick

ebotas Thu, 09/18/2008 - 20:30

Is not supposed to have 250 VPN Peers? and the interfaces should be 2GE 3 FE ?

I have the same part number as proteksa2006 with same versions OTB

Actions

This Discussion