09-11-2008 05:02 PM
Hi All,
I am using AS5400XM now and I'd like to count calls for sip-in and sip-out 24hrs with MRTG.
I can't find any OID yet
09-14-2008 08:40 PM
u mean u wanna limit the number of calls thrugh that sip-trunk ?
09-14-2008 09:29 PM
Are the calls using any T1 interfaces whether CAS or PRI? If yes, these OID's may help:
cpmDS1ActiveDS0s (.1.3.6.1.4.1.9.10.19.1.1.9.1.3)
isdnBearerOperStatus (.1.3.6.1.2.1.10.20.1.2.1.1.2)
callActiveTable (.1.3.6.1.2.1.10.21.1.3.1)
Regards,
Michael.
09-16-2008 07:19 AM
Thanks for your reply.
I know these OID.
But my question is how can I collect sip calls only toward in and outbound.
I'd like to grpah sip calls in 24 hrs using MRTG.
I am monitoring 24 hrs through TDM pri circuits using MRTG.
09-18-2008 04:54 AM
Does the "show call active voice brief' command give you the information you are looking for? If so, see if this information is helpful:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a008048349c.shtml#topic1
Hope this helps.
Regards,
Michael.
09-18-2008 09:10 AM
Thanks for your information.
But It doesn't match with my need.
When I excute GW#sh call active voice brief ,
I need end of message as below.
Telephony call-legs: 10
SIP call-legs: 12
H323 call-legs: 0
Call agent controlled call-legs: 0
SCCP call-legs: 0
Multicast call-legs: 0
Media call-legs: 0
Total call-legs: 22
I need to collect sip call-legs count every 5 mins .
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: