09-11-2008 09:53 PM
Hi, I am troubleshooting with SNMP trap, I am receiving trap from one router but not from another, both router has been configured in mpls. Can you give me the basic SNMP configuration for MPLS.
09-12-2008 01:37 AM
HI Goutam, [Pls RATE if HELPS]
Please find the SNMP Configuration template:
snmp-server community xxxxxxxxxxx RO 98
snmp-server community yyyyyyyyy RW 36
snmp-server trap-source Loopback0
snmp-server enable traps snmp linkdown linkup
no snmp-server enable traps tty
snmp-server enable traps mpls ldp session-up session-down
snmp-server host aaa.bbb.ccc.ddd xxxxxxxxxxx
The Command below will enable the monitoring the MPLS LDP Neighbor Sessions:
snmp-server enable traps mpls ldp session-up session-down
Hope I am Informative.
Pls RATE if HELPS
Best Regards,
Guru Prasad R
09-12-2008 01:51 AM
I will check it later. but can you tell me why "no snmp-server enable traps tty " given this and I want to tell you another things that is... for SNMP Trap vrf is configured in the router and the same vrf is allowed in loopback interface.
I am giving you the total configuration related to SNMP. please can you tell me which command is wrong and any extra commands is need to configuration or not to received the trap, I m not getting trap. Its very urgent.
09-17-2008 03:55 AM
Please try following commands and check
snmp-server trap-source Loopback77
09-18-2008 08:09 PM
09-18-2008 08:11 PM
09-19-2008 02:04 AM
I see following commands missing in router :-
snmp mib community-map globeR engineid 8000000903000018742FDE80
snmp mib community-map globeR@1 engineid 8000000903000018742FDE80
snmp mib community-map globeR@10 engineid 8000000903000018742FDE80
snmp mib community-map globeR@15 engineid 8000000903000018742FDE80
snmp mib community-map globeR@160 engineid 8000000903000018742FDE80
snmp mib community-map globeR@161 engineid 8000000903000018742FDE80
snmp mib community-map globeR@162 engineid 8000000903000018742FDE80
snmp mib community-map globeR@17 engineid 8000000903000018742FDE80
snmp mib community-map globeR@210 engineid 8000000903000018742FDE80
snmp mib community-map globeR@mst-0 engineid 8000000903000018742FDE80
snmp mib community-map globeR@mst-1 engineid 8000000903000018742FDE80
snmp mib community-map globeRW engineid 8000000903000018742FDE80
snmp mib community-map globeRW@1 engineid 8000000903000018742FDE80
snmp mib community-map globeRW@10 engineid 8000000903000018742FDE80
snmp mib community-map globeRW@15 engineid 8000000903000018742FDE80
snmp mib community-map globeRW@160 engineid 8000000903000018742FDE80
snmp mib community-map globeRW@161 engineid 8000000903000018742FDE80
snmp mib community-map globeRW@162 engineid 8000000903000018742FDE80
snmp mib community-map globeRW@17 engineid 8000000903000018742FDE80
snmp mib community-map globeRW@210 engineid 8000000903000018742FDE80
snmp mib community-map globeRW@mst-0 engineid 8000000903000018742FDE80
snmp mib community-map globeRW@mst-1 engineid 8000000903000018742FDE80
09-25-2008 06:22 PM
Hi can you confirm me that the MIB configuration should be same in both routers or not.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide