SNMP configuration

goutam_04 · ‎09-11-2008

Hi, I am troubleshooting with SNMP trap, I am receiving trap from one router but not from another, both router has been configured in mpls. Can you give me the basic SNMP configuration for MPLS.

guruprasadr · ‎09-12-2008

HI Goutam, [Pls RATE if HELPS]

Please find the SNMP Configuration template:

snmp-server community xxxxxxxxxxx RO 98

snmp-server community yyyyyyyyy RW 36

snmp-server trap-source Loopback0

snmp-server enable traps snmp linkdown linkup

no snmp-server enable traps tty

snmp-server enable traps mpls ldp session-up session-down

snmp-server host aaa.bbb.ccc.ddd xxxxxxxxxxx

The Command below will enable the monitoring the MPLS LDP Neighbor Sessions:

snmp-server enable traps mpls ldp session-up session-down

Hope I am Informative.

Pls RATE if HELPS

Best Regards,

Guru Prasad R

goutam_04 · ‎09-12-2008

I will check it later. but can you tell me why "no snmp-server enable traps tty " given this and I want to tell you another things that is... for SNMP Trap vrf is configured in the router and the same vrf is allowed in loopback interface.

I am giving you the total configuration related to SNMP. please can you tell me which command is wrong and any extra commands is need to configuration or not to received the trap, I m not getting trap. Its very urgent.

gagarwal4 · ‎09-17-2008

Please try following commands and check

snmp-server trap-source Loopback77

goutam_04 · ‎09-18-2008

Hi, the same configuration is running in another router and I am able to get SNMP Notification from that...but not getting from this router only.

goutam_04 · ‎09-18-2008

find the attachment

gagarwal4 · ‎09-19-2008

I see following commands missing in router :-

snmp mib community-map globeR engineid 8000000903000018742FDE80

snmp mib community-map globeR@1 engineid 8000000903000018742FDE80

snmp mib community-map globeR@10 engineid 8000000903000018742FDE80

snmp mib community-map globeR@15 engineid 8000000903000018742FDE80

snmp mib community-map globeR@160 engineid 8000000903000018742FDE80

snmp mib community-map globeR@161 engineid 8000000903000018742FDE80

snmp mib community-map globeR@162 engineid 8000000903000018742FDE80

snmp mib community-map globeR@17 engineid 8000000903000018742FDE80

snmp mib community-map globeR@210 engineid 8000000903000018742FDE80

snmp mib community-map globeR@mst-0 engineid 8000000903000018742FDE80

snmp mib community-map globeR@mst-1 engineid 8000000903000018742FDE80

snmp mib community-map globeRW engineid 8000000903000018742FDE80

snmp mib community-map globeRW@1 engineid 8000000903000018742FDE80

snmp mib community-map globeRW@10 engineid 8000000903000018742FDE80

snmp mib community-map globeRW@15 engineid 8000000903000018742FDE80

snmp mib community-map globeRW@160 engineid 8000000903000018742FDE80

snmp mib community-map globeRW@161 engineid 8000000903000018742FDE80

snmp mib community-map globeRW@162 engineid 8000000903000018742FDE80

snmp mib community-map globeRW@17 engineid 8000000903000018742FDE80

snmp mib community-map globeRW@210 engineid 8000000903000018742FDE80

snmp mib community-map globeRW@mst-0 engineid 8000000903000018742FDE80

snmp mib community-map globeRW@mst-1 engineid 8000000903000018742FDE80

goutam_04 · ‎09-25-2008

Hi can you confirm me that the MIB configuration should be same in both routers or not.