09-12-2008 02:55 AM - edited 03-15-2019 01:13 PM
hi,
ive a problem.
i have a working CME4.1 infrastructure with Nokia E65.
but if someone calls me on the Nokia, on the display there is the calling number with the @proxy-ip attached.
like: 5546554@10.10.10.15
but i like: 5546554
is that possible?
without translation rules?
thx
Solved! Go to Solution.
09-14-2008 10:26 PM
Hi,
Did you install SIP voip settings tool?
It's an application to define advanced voip settings.
You have to define advanced settings via that application (installations->Sip voip settings).
Those settings are not visible in SIP settings.
-Pasi-
View solution in original post
09-12-2008 05:55 AM
Yes it's possible.
Download SIP Voip Settings tool:
http://www.forum.nokia.com/info/sw.nokia.com/id/d2d27e6c-bd52-4534-9aa6-19e606b80709/SIP_VoIP_Settings_v1_0_en.zip.html
And check Ignoring domain part setting.
User guide is here:
http://www.forum.nokia.com/info/sw.nokia.com/id/56b636ee-f2d9-4b95-b9d4-9f31e76383be/SIP_VoIP_Settings_User_Guide_v1_0_en.pdf.html
You can use Nokia E65 also with Skinny protocol if you want. There is a SCCP client available for that http://www.businesssoftware.nokia.com/nokia_intellisync_call_connect_for_cisco_downloads.php
09-12-2008 06:20 AM
thx pasi,
but i haven't any "Ignoring domain part setting" in my SIP menu on my E65.
SCCP i have already installed also licensed. but i have some "private" Phones where i can't install my sccp licenses (only for company phones)
thx.
any other ideas.
09-14-2008 11:58 PM
it worked fine now.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
