Solved: How to set RRM parameters

jcosgrove · ‎09-12-2008

Is there any way to set the RRM parameters such as max power or channel selection for AP's. I would like to have the network set their own settings but would like to set a max power for the AP's

jaichauh · ‎09-12-2008

Hi!

Please take a look at the following link:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008072c759.shtml#rf-gui2

HTH

-Jai

JC

View solution in original post

bbxie · ‎09-12-2008

yes, you can set RRM parameters through GUI:Wireless > 802.11a/n or 802.11b/g/n > RRM

or by using CLI such as "config {802.11a | 802.11b}xxx" or "config advanced {802.11a | 802.11b} xxx", for example if you want to set a max 11a TX power for AP, you can use "config 802.11a txPower global 1". You can refer to following link for more detailed information:

http://www.cisco.com/en/US/docs/wireless/controller/5.1/configuration/guide/c51rrm.html