Help please with Aironet 1200 (AP1220B)

Unanswered Question
Sep 12th, 2008
User Badges:


I need help with a 1200 series Aironet. When doing a SH IP INT BRIEF it is showing RESET on the Dot1Radio0 interface.

Dot11Radio0 Status reset

What does this mean? and how to I initiate this interface? is it because I do not have the extended radio antenna plugged in?

Thanks in advance.

Interface IP-Address OK? Method Status Protocol

BVI1 YES NVRAM down down

Dot11Radio0 unassigned YES NVRAM reset down

FastEthernet0 unassigned YES NVRAM up down


I have consoled into the second WAP with IP and it is not showing this problem.

Could it be that has a damaged or malfunctioning radio antenna?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
jaichauh Fri, 09/12/2008 - 07:58
User Badges:


Please check the station role; it should be Root or Access point on the AP and SSID is enabled on the radio.

If SSID is configured and role is set as desired, do a hard reset on the AP and see if it helps.

Check the LED status as well. Review the link for LED indication:




This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode