show adjacency int command in cef

Answered Question
Sep 12th, 2008

hi every body!

I need some help with the following:

switch# show adjacency fastethernet 6/1

protocol int address

ip f6/1 100.100.100.1(9)

What is"9" in the above line?

00d004823400800

epoch:0

what is epoch in the aboce line?

thanks a lot and have a nice day!




Correct Answer by Jon Marshall about 8 years 5 months ago

Sarah


Have a look at this link - scroll down to the table and all the output is explained. Please come back if you need further clarification.


http://www.cisco.com/en/US/tech/tk827/tk831/technologies_tech_note09186a0080094303.shtml#topic1


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Jon Marshall Fri, 09/12/2008 - 11:20

Ullas


I'm not sure it does. According to the doc i posted the number in brackets after the IP address is the number of times this adjacency is pointed to by FIB entries.


Jon

ullasupendran Fri, 09/12/2008 - 11:27

hi jon


You document looks correct.I mistook the protocol parameter of command ref in the link i send .


Thanks

Ullas

Actions

This Discussion