cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
450
Views
0
Helpful
5
Replies

show adjacency int command in cef

sarahr202
Level 5
Level 5

hi every body!

I need some help with the following:

switch# show adjacency fastethernet 6/1

protocol int address

ip f6/1 100.100.100.1(9)

What is"9" in the above line?

00d004823400800

epoch:0

what is epoch in the aboce line?

thanks a lot and have a nice day!

1 Accepted Solution

Accepted Solutions

Jon Marshall
Hall of Fame
Hall of Fame

Sarah

Have a look at this link - scroll down to the table and all the output is explained. Please come back if you need further clarification.

http://www.cisco.com/en/US/tech/tk827/tk831/technologies_tech_note09186a0080094303.shtml#topic1

Jon

View solution in original post

5 Replies 5

Jon Marshall
Hall of Fame
Hall of Fame

Sarah

Have a look at this link - scroll down to the table and all the output is explained. Please come back if you need further clarification.

http://www.cisco.com/en/US/tech/tk827/tk831/technologies_tech_note09186a0080094303.shtml#topic1

Jon

Thanks a lot Jon.marshall!

ullasupendran
Level 1
Level 1

Thats the protocol number at which the adjecency is happening.Check this out

http://www.cisco.com/en/US/docs/ios/ipswitch/command/reference/isw_s1.html#wp1011414

HTH

Ullas

Ullas

I'm not sure it does. According to the doc i posted the number in brackets after the IP address is the number of times this adjacency is pointed to by FIB entries.

Jon

hi jon

You document looks correct.I mistook the protocol parameter of command ref in the link i send .

Thanks

Ullas

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: