accessing internet through remote access-VPN

Answered Question
Sep 12th, 2008

Hi Guys

I have configured Remote Access VPN on ASA 5510. VPN Users are authenticated and they are getting the ip address and DNS addresses. I want the VPN users to access the internet through the same ASA they are connecting to. As I have already configured PAT on the firewall and Local Lan users are using internet through this ASA only. I want the VPN users should also access the internet through the same firewall instead of using their own Local Lan(we do basically by using split tunnelling).

Please suggest.

I have this problem too.
0 votes
Correct Answer by JORGE RODRIGUEZ about 8 years 3 months ago

If your RA tunnel is full tunnel this is what you need. Hairpining , you RA VPN need to be full tunnel, no split.

same-security-traffic permit intra-interface

nat (outside) 1

[edit]

Example here

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805734ae.shtml

PLS rate any helpful post

Rgds

Jorge

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.

Actions

This Discussion