cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
419
Views
0
Helpful
2
Replies

accessing internet through remote access-VPN

pranuvpandit
Level 1
Level 1

Hi Guys

I have configured Remote Access VPN on ASA 5510. VPN Users are authenticated and they are getting the ip address and DNS addresses. I want the VPN users to access the internet through the same ASA they are connecting to. As I have already configured PAT on the firewall and Local Lan users are using internet through this ASA only. I want the VPN users should also access the internet through the same firewall instead of using their own Local Lan(we do basically by using split tunnelling).

Please suggest.

1 Accepted Solution

Accepted Solutions

JORGE RODRIGUEZ
Level 10
Level 10

If your RA tunnel is full tunnel this is what you need. Hairpining , you RA VPN need to be full tunnel, no split.

same-security-traffic permit intra-interface

nat (outside) 1

[edit]

Example here

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805734ae.shtml

PLS rate any helpful post

Rgds

Jorge

Jorge Rodriguez

View solution in original post

2 Replies 2

JORGE RODRIGUEZ
Level 10
Level 10

If your RA tunnel is full tunnel this is what you need. Hairpining , you RA VPN need to be full tunnel, no split.

same-security-traffic permit intra-interface

nat (outside) 1

[edit]

Example here

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805734ae.shtml

PLS rate any helpful post

Rgds

Jorge

Jorge Rodriguez

Thanx Jorge

Its working now.....

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card